Endura M-18 Pod System By Innokin Review

Endura M-18 Pod System by Innokin is the first pod system in the Endura series. The Endura series ranks among the flagship products for Innokin thanks to their exceptional design and performance. You can find many of the Endura series on Hazetown Vapes.

The device sports an enhanced pod rotation adjustable airflow control system that consists of removing the pod and turning it 180-degrees to alternate between a restrictive and open draw. It does not matter whether you prefer RDL or MTL vapes, the M-18 is designed to deliver your ideal hit.

Innokin makes use of a new and improved coil for the Endura M-18 pod system. The vaporizer features upgraded BVC coils that allow for smooth airflow from the bottom of the coil upward through the coil’s center to deliver flavorful draws. Although the coils feature a different shape and appearance, Innokin found an intuitive way to make them compatible with the T18E, T22E, T18II, and T18 Mini coils.

What’s In The Box?

  • 1 x Endura M18 Pod Kit
  • 2 x 1.6ohm Endura M18 Coil
  • 1 x Pod Base
  • 1 x Type-C Charging Cable
  • 1 x Quick Start Guide
  • 1 x Warning Card

You can get all this for only $31 on Hazetown Vapes. Talk about an incredibly efficient and affordable pos system starter kit. All you need is your favorite ejuice flavor and you are all set.


  • Dimensions: 86.5 x 30.2 x 17mm
  • Pod Capacity: 2ml/4ml
  • Power Output: 10W / 13.5W
  • Battery: 700mAh
  • Charging: USB-C 0.8A
  • 3 light battery indicator
  • Auto draw activation
  • Adjustable Airflow (2 settings)
  • Replaceable Coils
  • Side Fill

Design and Build 

The body of the Endura M-18 looks a bit rectangular, but it is actually an oval with flat sides, so it fits comfortably in your hand. Innokin seemed to make use of Zinc allow in the construction, and it feels perfect. Thanks to its matte finish, it grips well in your hand and does not slip off easily.

The Endura M-18 pod system features a firing button located at the base of the side. The button is set into the device to prevent accidental presses.  It is convenient to use even if you are an absolute beginner. Three rapid clicks on the button turn the device on and off. Once it is on, you can switch to Boost Mode by pressing the power button on more time. Boost Mode adjusts the wattage from 10W to 13.W to deliver more heat and flavor.

The device itself uses an auto draw mechanism so the firing button is there to just turn the device on and off and to change the power settings.

On the side of the device, opposite the firing button is the airflow hole that measures 1x2mm. Single-Handedly, this airflow is capable of pulling a very loose MTL vape, loose enough to use as a restrictive DTL vape even though the device is not designed for DTL vaping.

Battery Performance

What’s even better than a 700mAh battery is the fast-charging Type-C charging port, something many vape devices still seem to lack. 700mAh charges in somewhere around an hour so you get to spend more time vaping than you do charging.

On the body of the device is a 3-light battery level indicator. One light indicates that your battery is less than 20%, two lights are for when your battery is between 20% and 60%, three lights are for when your battery is more than 60%. There is a fourth light that represents the power setting. Green for 10W and Purple for 13.5W.


The pod is equipped to carry 2ml/4ml of ejuice. There is a hole on the front and back of the device that allows you to easily monitor your ejuice level. The hole goes all the way to the bottom of the pod so you can see down to the very last drop of ejuice.

The pod features a convenient side-fill mechanism. You simply remove the pod from the kit, lift the black tab on the side of the pod, pour in your ejuice through the exposed fill hole, close the tab securely and insert the pod back into the device.

You do not make any special effort to replace the M-18 coils. The device features a gasket-like component that allows you to twist the base to replace the BVC coil while the pod remains intact.


DTL vapers would find the performance of this starter kit incredibly impressive thanks to the enhanced airflow setting and BVC coil configuration. Its battery life and fast charging also mean that you will be able to enjoy vaping over and over. All in all, the Endura M-18 pod system by Innokin is a simple and easy-to-use device that does not let down on flavor and vapor.

Every vaper has asked the question “Are there vape shops near me?” Today, no matter where you stay, there is bound to be a vape store near you. Hazetown Vapes for example has stores in 325 Weston Rd Unit 2A, Toronto, ON M6N 4Z9, and 166 Spadina Ave, M5T 2C2, Toronto, Ontario, Canada. You can also decide to buy directly from their online store and have it delivered to you in no time.


Your email address will not be published. Required fields are marked *